Metal roofing
Architectural shingles
Tile roofing
Owens CorningFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
IKO Roof Installation in San Diego: What to Know First
IKO roof installation in San Diego typically runs $9,500 to $18,500 for a full replacement on a standard single-family home, with most jobs completed in 3 to 5 working days. As an independent IKO service provider, we install Cambridge, Dynasty, and Nordic lines regularly across San Diego County, and we always put a written price in your hand before the first shingle comes off. If you’re a San Diego homeowner researching IKO for a new roof or replacement, this page covers what actually matters: how these shingles hold up here, what they cost, and who you can trust to install them. Call (619) 810-5520 for a free estimate.
How IKO Products Fail – and How We Fix Them
IKO makes a solid shingle, but every brand has patterns. After years of tearing off and installing IKO roofs across San Diego, here’s what we actually see, line by line.
- Cambridge granule loss on south-facing slopes. The Cambridge line, IKO’s most common architectural shingle, can shed granules faster than some competitors on slopes that bake in direct San Diego sun all day. We’ve seen this in Clairemont Mesa and El Cajon where southern exposure is relentless. The fix at installation is proper underlayment and ventilation, not just a prettier shingle. We check attic airflow before we nail anything down.
- Dynasty seal strip issues near the coast. Dynasty shingles have a reinforced nail strip and a strong sealant, but in salt-heavy air zones like Ocean Beach and Pacific Beach, we’ve found the seal can weaken over time if the deck wasn’t prepped right. We hand-seal starter rows and keep a clean deck before laying any Dynasty shingle, which means fewer wind-lift callbacks.
- Nordic blistering from trapped heat. Nordic is IKO’s premium architectural line, and it’s thick and durable, but San Diego attics get hot. Without ridge and soffit ventilation working together, any laminated shingle can blister. We flag this before installation because once a shingle blisters, it’s not an IKO defect, it’s a ventilation problem nobody explained to you.
- Improper nail placement from rushed installs. IKO shingles have a clearly marked nail line, and warranty claims get denied when nails miss it. We see this on roofs installed by crews racing to finish. Our installers hand-check nail position, and Grant walks the job himself before any underlayment gets covered up.
- Flashing failures at San Diego valleys. This isn’t IKO-specific, but it’s the top reason we get called to fix a newer IKO roof. Valleys near canyons and coastal bluffs catch wind-driven rain, and if the flashing was reused or bent cheaply, water finds a way in. We replace flashing rather than rescuing it on every full installation.
Styles & brands we work with




Our IKO Roof Installation Process
You’ll know exactly what happens, in what order, and who’s on your roof.
- 1
You call, a person answers. A live human picks up at (619) 810-5520, day or night. You’ll describe your roof and we’ll schedule a walkthrough.
- 2
We inspect and measure. Grant or a lead technician walks the entire roof, checks the decking, flashing, ventilation, and existing shingle condition. You get a written report of what we found.
- 3
You get a written price. Before any work starts, you receive a line-item quote with material costs, labor, disposal, and permit fees. No surprises. No change orders unless you ask for something different.
- 4
We install to IKO’s specs. Tear-off, deck inspection and repair, synthetic underlayment, IKO starter strips, IKO shingles nailed to the marked line, new flashing, and proper ridge ventilation. Every step follows IKO’s published installation requirements so your warranty stays intact.
- 5
Final walkthrough and written guarantee. Grant walks the job with you, confirms clean-up, and hands you the written guarantee. You keep our number and a named contact for anything that comes up.
See the difference
Before
After
Before
After
Before
AfterWhat IKO Roof Installation Costs in San Diego
Here’s what we quote on IKO jobs across San Diego, using real pricing from recent projects.
- IKO Cambridge full replacement: $9,500 – $13,500 for a typical 1,800 sq ft single-story home.
- IKO Dynasty full replacement: $11,500 – $16,000 depending on pitch, tear-off layers, and decking repairs.
- IKO Nordic full replacement: $14,000 – $18,500 for larger or steeper homes, including premium underlayment and ventilation upgrades.
- Partial repair (flashing, ridge, or section replacement): $450 – $2,800 depending on scope.
What moves the price: roof pitch, number of layers being removed, decking condition, access for debris removal, and whether you want upgraded underlayment or ridge ventilation. Every estimate is free and every price is fixed before work begins. Call (619) 810-5520 and we’ll give you an exact number for your roof.
Why San Diego Homeowners Call Mercer Roofing Co San Diego for IKO Work
You can get an IKO roof put on by any licensed roofer. What’s harder to find is a crew you’d be comfortable having at your house all week. We solve that before we ever climb a ladder. Every technician is background-checked, identity-verified, and shows up in a marked uniform with a photo ID badge. You get their name and photo sent to you before they arrive. That’s the Threshold Verified standard, and every Mercer Roofing Co San Diego technician meets it. We also back every installation with our 365-Day Done Right Promise: if something isn’t right within a year, we make it right. And if you’re still deciding between IKO and another brand, we install GAF, Owens Corning, and CertainTeed too, so the conversation stays honest. Founded in 2000 and part of the Threshold Group family, we’ve built our San Diego reputation one roof at a time. A roof shouldn’t be something you worry about, that’s what we’re here for.
FAQs
No. As long as the installation follows IKO’s published specifications, your manufacturer’s warranty stays intact. We install to IKO’s exact nail line, ventilation, and underlayment requirements, and we document the process. If a warranty claim ever comes up, you’ll have the records to support it. Call (619) 810-5520 if you’d like to see how we document an installation.
Most full IKO replacements take 3 to 5 working days from tear-off to final cleanup. Weather delays are rare in San Diego, but we’ll tell you upfront if your roof’s pitch or decking condition adds time. You’ll get a written timeline with your estimate.
Yes, we can source current IKO colors and match them closely. If your shingles are discontinued or badly faded, we’ll tell you honestly whether a spot repair will blend well or whether a full slope replacement makes more sense. No pressure, just options with prices.
Yes. Permits are pulled for every full roof replacement in San Diego, and inspections are scheduled and passed before we consider the job done. You’ll see the permit line item in your written estimate.
No. The written price is the price. The only exception is if we uncover rotted decking or code issues that couldn’t be seen before tear-off, and we walk you to the roof, show you the problem, and price the repair before anything is done. No surprise invoices.
Written by Grant Whitlock, Owner, Mercer Roofing Co San Diego at Mercer Roofing Co San Diego, serving San Diego and nearby areas.