Boral Shingle Repair Nationwide

Boral Shingle Repair: The San Diego Owner’s Guide

Boral shingle repair in San Diego typically runs $425 to $1,150 installed, depending on how many shingles failed and whether the underlayment beneath them needs work. We stock Boral-compatible shingles on our trucks and can usually complete a standard repair the same week you call. Most San Diego homeowners discover a failed Boral shingle after a Santa Ana wind event leaves pieces in the yard, or when a ceiling stain shows up a few months after a winter rain. The shingle itself is rarely the root cause – it’s almost always what’s underneath or around it.

Call (619) 810-5520

Key takeaways:

• We install Boral-compatible shingles matched to your existing roof profile
• Repairs come with our 365-Day Done Right Promise, in writing
• Every quote is a fixed written price before any work starts
• Mercer Roofing Co San Diego is an independent contractor, not affiliated with Boral

Which Boral Models This Applies To

If your roof was installed in San Diego between roughly 2005 and 2018, there’s a good chance it’s a Boral concrete or clay tile system, though we also repair Boral’s stone-coated steel lines. The repair approach differs by material. Boral concrete tile (common in Clairemont Mesa, La Jolla, and Scripps Ranch) uses a flat profile with interlocking edges, and cracked tiles are usually replaced one-for-one. Boral clay tile, which we see more often in Spanish-style homes in Point Loma and Mission Hills, runs in barrel or flat profiles and needs closer color matching because the fired-clay tones shift in full sun.

Here’s the compatibility gotcha most homeowners don’t know: Boral changed their tile lug design over the years, so a tile from 2010 won’t always seat properly against a tile from 2023 even if the color looks identical. We verify the series and lug pattern before ordering. Boral no longer manufactures residential roofing products in the US – the concrete and clay tile lines were sold off – so we source OEM and quality aftermarket equivalents from a network of San Diego suppliers who still carry inventory. For stone-coated steel, we match the barrel profile and gauge; a thinner aftermarket sheet can flex under a San Diego summer heat load and crack the stone coating within a few seasons.

Signs Your Boral Shingle Repair Is Failing

• Cracked or missing tile after a wind event. Boral concrete tiles are heavy, and when the underlying batten or adhesive has degraded, the tile can lift at the leading edge and crack against its neighbor. You’ll usually find fragments in the gutter or on the ground first, not the roof itself.
• Granule loss in stone-coated steel. If you see bare metal starting to show through the stone coating, especially on south-facing slopes, the UV in San Diego has done its work. The roof can still shed water, but the exposed steel will begin corroding within two to three years without intervention.
• Water staining on ceilings or walls, especially after our first big winter rain. The first storm after a dry spell is when failed underlayment shows itself. By the time the stain appears, the issue has usually been active for weeks.
• Loose or flapping shingles you can hear in high wind. If a Boral panel or tile is clacking against its neighbor during a Santa Ana, the fastening has already failed. The next strong gust can send it into the yard or worse, into a neighbor’s car.
• Daylight visible through the sheathing from inside the attic. Get up there with a flashlight on a clear afternoon. If you can see light where you shouldn’t, the roof assembly has a gap that water will find.

Replacement Cost & What’s Included

Here’s what San Diego homeowners should expect to pay for Boral shingle repair with us in 2025:

• Replacing 1 – 5 cracked concrete tiles: $425 – $650 (includes tile, fasteners, and sealing)
• Replacing 6 – 15 tiles with underlayment spot repair: $650 – $900
• Stone-coated steel panel replacement (1 – 3 panels): $550 – $850
• Valley or flashing repair involving Boral tile removal: $500 – $1,150

The range depends mostly on two things: how many tiles we have to lift to get to the problem, and whether the underlayment beneath them is still serviceable. In coastal San Diego, salt air shortens the life of metal flashing significantly – we often find the flashing is the actual culprit and the shingle was just the messenger. Every price we quote is written, fixed, and handed to you before any work starts. No change orders, no “we found more once we got up there” surprises. If the repair fails within 365 days, we come back and make it right at no cost, and we give you that guarantee in writing on every job.

DIY or Call Us?

There are things you can safely do from the ground or from inside the house, and then there’s what should stay on our side of the ladder. You can check your gutters for tile fragments after a wind storm, peek at the attic for daylight, and snap photos of any cracked tiles you can see from the ground. That’s useful information when you call us. What we don’t recommend is walking a tile roof yourself. Boral concrete tiles support a person’s weight, but one misstep at the edge or on a hip line can send you off the roof – and if a tile is loose beneath you, that’s 12 pounds of concrete waiting to slide. Falls from single-story San Diego roofs cause real injuries every year, including to experienced contractors. Let us do the walking. Call (619) 810-5520 and we’ll schedule a free inspection and give you a written repair quote before anyone climbs a ladder.

FAQs