Boral Roof Installation Nationwide

Boral Roof Installation in San Diego: What to Know First

Boral roof installation in San Diego typically runs $9,800 to $18,500 for a full replacement on a 1,600 – 2,200 square foot home, with most jobs completed in three to five working days once materials arrive. We’re an independent Boral service provider, not a manufacturer-authorized dealer, which means we install the product honestly and stand behind the installation with our own written guarantee. If you own a home with Boral concrete or clay tile roofing, or you’re considering installing it, this page tells you exactly what happens on the roof, what it costs, and who shows up at your door. Call (619) 810-5520 for a written estimate before any work begins.

Call (619) 810-5520

Every Boral roof we install in San Diego gets a written price up front, a 365-day written guarantee on the installation, and a technician whose name and photo you’ll see before they arrive.

How Boral Products Fail – and How We Fix Them

Boral tile is heavy, durable, and particular about how it’s installed. Most of the Boral roofs we’re called to replace or repair in San Diego fail because of what’s underneath the tile, not the tile itself. Here are the five failure patterns we see most often, and what we do about them.

• Boral Concrete Tile with failed underlayment. The Boral Savannah and Boral Barcelona concrete tile lines hold up for decades, but the asphalt-saturated felt beneath them typically gives out in 18 – 25 years, especially on San Diego’s east-facing slopes where UV reflection from the tile bakes the underlayment. We remove the tile carefully for reuse where possible, replace the underlayment with a high-temperature synthetic, and reset or replace the tile over a clean deck.
• Boral Clay Tile with broken corners at the eaves. Clay tiles like Boral’s Vera Cruz or Mission lines take a beating from tree debris and ladder traffic. A broken corner lets water wick under the adjacent tile and rot the battens. On replacement jobs, we never walk mid-tile, we work from roof ladders and walk boards, and we order replacement units before tear-off so the new roof doesn’t sit half-open waiting for material.
• Boral lightweight tile with cracked interlock from wind-driven movement. Boral’s lightweight concrete tiles are easier on framing, but they’re thinner at the interlock. In San Diego’s Santa Ana season, tiles can flex and micro-crack at the grooves. We inspect for stress fractures at every interlock on the windward side and swap in from the same production lot so the color match doesn’t shift in the afternoon light.
• Boral ridge and hip tiles with eroded mortar joints. The factory Boral ridge caps hold fine; it’s the site-mixed mortar that fails. San Diego’s coastal salt air attacks mortar within 8 – 12 years, and once a ridge joint opens, water drops straight onto the underlayment below the surface. We repoint with a polymer-modified mortar that flexes with the thermal movement of the tile, and we mechanically fasten the ridge caps with a hidden clip instead of relying on mortar alone.
• Boral tile installed over a deck that was never rated for it. We survey a lot of Clairemont Mesa homes where a Boral roof was installed without checking the framing. Concrete tile roofs add 6 – 10 pounds per square foot, and on older San Diego homes built for composition shingle, that overload shows up as a sag in the ridge and cracks at the interior drywall. Before we lay one new Boral tile, we walk the attic and verify the rafter spacing and span against the tile weight. If the numbers don’t work, we say so and we show you the math before you spend a dollar.

Our Boral Roof Installation Process

Boral installation is not a shingle job with a different material. It’s slower, heavier, and less forgiving of shortcuts. Here’s how our crew handles a Boral roof from the first phone call to the final walkthrough, step by step.

1. 1
   Written estimate and roof survey. We measure every plane, inspect the flashing and decking, and check the attic framing for the tile load. You get a line-item written price before any work is scheduled. No exceptions.
2. 2
   Material order and lead time confirmation. Boral tile batches pull from regional stock. We confirm lead time and delivery date before we schedule tear-off so your roof is never exposed longer than the job requires.
3. 3
   Tear-off and deck inspection. We remove the old roof and examine the sheathing. Rotted decking is replaced with exterior-rated plywood or OSB, with the replacement cost called out in your original estimate wherever possible.
4. 4
   Underlayment and flashing installation. We install a high-temperature synthetic underlayment and new flashing at eaves, valleys, and penetrations. This is where most Boral installations fail, so we photograph every transition before tile goes down.
5. 5
   Tile installation and fastening. Each Boral tile is set to the manufacturer’s exposure and fastened per the wind zone load for your San Diego neighborhood. Ridge and hip units get mechanical fasteners, not just mortar.
6. 6
   Final water test and written guarantee. We run water at every flashing transition, check the interlock pattern, and walk the entire roof with you. You get a written installation guarantee good for 365 days, and a copy of every material spec used on the job.

What Boral Roof Installation Costs in San Diego

Boral roof installation in San Diego is a premium roof, and the cost reflects the weight, the material, and the labor discipline the job demands. Here are real working ranges from jobs we’ve quoted in the county.

• Full Boral concrete tile replacement on a 1,600 sq ft home: $9,800 – $13,500
• Full Boral clay tile replacement on a 2,000 sq ft home: $13,000 – $18,500
• Complete re-underlayment with tile reset (tile reuse condition permitting): $7,400 – $10,200
• Ridge and hip repointing with mechanical fastening: $1,100 – $2,800 depending on linear footage
• Decking replacement, per 4×8 sheet where decking is rotted: $95 – $140 installed

What moves the price is roof complexity (hips, valleys, dormers), whether your existing tile can be reused or needs replacement, and how much decking is failing underneath. Multi-story homes carry additional labor. Every estimate we write is free and itemized. Call (619) 810-5520 for an exact quote on your Boral roof, and you’ll have a written number before anyone climbs a ladder.

Why San Diego Homeowners Call Mercer Roofing Co San Diego for Boral Work

The honest answer is that Boral tile is unforgiving if the installer treats it like architectural shingle, and San Diego homeowners can tell the difference within two or three winters. We’ve been installing tile roofs in this county since before the current generation of lightweight tile hit the market, and we’re cross-trained across the brands we service: GAF, Owens Corning, and CertainTeed, so when a home needs a section matched to a different underlayment system, we’re the ones coordinating the transition without the blame game.

But the reason people stay on the phone after asking about Boral is different from the reason they call in the first place. Before every visit, you get the name and photo of the technician who will be at your door. That technician is background-checked, identity-verified, wears a marked uniform, and shows a photo ID badge when you answer. We’re contractually held to that standard under the Threshold Group quality framework, and we’ve never had a homeowner tell us it didn’t matter.

Grant Whitlock, our owner, walks every Boral installation himself before the first tile comes off the pallet. He grew up in Los Angeles, learned roofing at Los Angeles Trade-Technical College, and has spent the better part of two decades on San Diego roofs, including more than a few storm-damaged ones in Clairemont Mesa. He’ll tell you that a roof shouldn’t be something you worry about – that’s what we’re here for. And he means it, which is why every Boral job we finish is backed by our 365-Day Done Right Promise and a written guarantee on the installation.

FAQs